ROAD CLEANER RC-H2 – Oil spill removal – High-pressure washers and vacuum cleaners

Price on request

Available immediately, delivery time: 3-4 weeks

Product number: KWF-ROAD CLEANER RC-H2

Product information "ROAD CLEANER RC-H2 – Oil spill removal – High-pressure washers and vacuum cleaners"

The ROAD CLEANER RC-H2 is the professional solution for removing oil marks in vehicles with a power take-off (PTO), such as the VW Crafter, MAN TGE, Mercedes Sprinter, IVECO Daily or Renault Master. It is powered by the vehicle’s engine – no harmful exhaust fumes are produced, enabling safe operation in the load compartment.

Thanks to the simultaneous use of a high-pressure cleaner and a vacuum extractor, water consumption is reduced and cleaning is carried out more quickly and in a more environmentally friendly manner. The extracted liquid is collected in a stainless steel tank. The system meets the requirements for ATEX-1 and ATEX-21 zones.

Technical specifications: Hydraulic flow requirement 15 l/min at 180 bar, high-performance cooling, emergency stop switch, operating hours counter, 300-litre water tank, 10-metre suction hose and 40-litre collection tank with automatic shut-off.

You can find more information about the manufacturer here: FEP at KW Hydraulik.
Applications: Hydraulics for commercial vehicles and vans up to 7.5 tonnes.

This model is designed for installation in vehicles with a transmission power take-off (PTO).

VW CRAFTER / MAN TGE
MERCEDES SPRINTER
IVECO DAILY
RENAULT MASTER / OPEL MOVANO / NISSAN NV400

As it is powered by the vehicle’s engine, no harmful exhaust fumes are produced at the unit itself, enabling safe operation in the load compartment.

With this drive option, the high-pressure cleaner can be operated simultaneously with the vacuum cleaner.

This method requires less water, makes the work quicker and is more environmentally friendly.

The extracted liquid is collected in a stainless steel tank.

The unit can be used in potentially explosive atmospheres classified as ATEX-1 and ATEX-21.

Features

Hydraulic system: 15 litres at 180 bar
Hydraulic system with high-performance cooling.
Thermal protection switch, oil level monitoring
Pressure gauge and pressure relief valve
Control system with operating hours counter
Emergency stop switch (disconnects the system from the drive)
12-volt on-board power supply for system control
300-litre stainless steel water tank with water separator
5-litre tank for cleaning additive with proportioning control
Brush for vacuum unit
Washing lance with high- and low-pressure nozzles
Hydraulic vacuum suction unit
Suction height: 3 metres
Spring-return hose reel for suction hose, 10 metres, hose diameter 38 mm
40-litre tank for collecting the oil-water mixture, with automatic shut-off when the tank is full
Approved for ATEX-1 and ATEX-21 zones

Model ROAD CLEANER RC-H2C with additional gas-powered water heater.

Sie haben Fragen zu diesem Produkt oder benötigen ein Angebot?

Ob technische Detailfragen, Lieferzeiten oder ein individuelle Projektangebot für größere Stückzahlen: Unsere Experten prüfen Ihre Anfrage umgehend und melden sich werktags innerhalb von 24 Stunden mit einem konkreten Angebot.