Skip to main content Jump to search Skip to main navigation

ROAD CLEANER RC-H2C - Oil spill removal - High-pressure cleaner with water heater and vacuum cleaner

Product information "ROAD CLEANER RC-H2C - Oil spill removal - High-pressure cleaner with water heater and vacuum cleaner"

The ROAD CLEANER RC-H2C combines a high-pressure cleaner, a hydraulic vacuum cleaner and an additional gas-powered water heater for efficient use in vehicles with a power take-off (PTO), such as the VW Crafter, MAN TGE, Mercedes Sprinter, IVECO Daily or Renault Master. It is operated via the vehicle engine so that no harmful exhaust fumes are emitted from the unit - ideal for safe use in the cargo area.

Thanks to the option of operating cleaning and extraction at the same time, water consumption is minimised and working time is reduced. The extracted liquid is collected in a robust stainless steel tank. The ROAD CLEANER RC-H2C is also approved for use in potentially explosive atmospheres (ATEX-1 and ATEX-21).

Technical highlights: Hydraulic requirement 15 l/min at 180 bar, high-performance cooling, operating hours counter, emergency stop switch, 300-litre water tank, suction hose with a length of 10 m and a 40-litre collection tank with fill level cut-off.

You can find more information about the manufacturer here: FEP at KW Hydraulik.
Area of application: Hydraulics for commercial vehicles & vans up to 7.5 tonnes.



This model is for installation in vehicles with transmission power take-off (PTO):

  • VW CRAFTER / MAN TGE
  • MERCEDES SPRINTER
  • IVECO DAILY
  • RENAULT MASTER / OPEL MOVANO / NISSAN NV400
Driven by the vehicle engine, no harmful exhaust gases are produced at the unit, which enables safe operation in the load compartment.
With this drive variant, the high-pressure cleaner can be operated simultaneously with the vacuum cleaner.
This method requires less water, the work is faster and is more environmentally friendly.
The extracted liquid is collected in a stainless steel container.
The unit can be used in ATEX-1 and ATEX-21 hazardous areas.

Features
  • Hydraulics: 15 litres at 180 bar
  • Hydraulic system with high-performance cooling.
  • Thermal protection switch, oil level monitoring
  • Pressure gauge and pressure relief valve
  • Control unit with operating hours counter
  • Emergency stop switch (disconnects the system from the drive)
  • 12 volt on-board voltage for system control
  • 300 litre stainless steel water tank with water separator
  • Tank for cleaning additive 5 litres with proportion regulator
  • Brush for vacuum cleaner
  • Wash lance with high and low pressure nozzle
  • Hydraulic vacuum cleaner
  • Suction height 3 metres
  • Hose reel with spring return for suction hose, 10 metres, hose diameter 38 mm
  • 40 litre tank for holding the oil-water mixture, switch-off when tank is full
  • Approval for ATEX-1 and ATEX-21 areas
Model ROAD CLEANER RC-H2C with additional gas-powered water heater.