ROAD CLEANER RC-HC - Oil spill removal - High-pressure cleaner with water heater and vacuum cleaner
Price on request
Available immediately, delivery time: 3-4 weeks
Product information "ROAD CLEANER RC-HC - Oil spill removal - High-pressure cleaner with water heater and vacuum cleaner"
The ROAD CLEANER RC-HC is a versatile high-pressure cleaner with vacuum cleaner and gas-powered water heater for installation in vans without a power take-off (PTO) such as the VW T6.1, VW Crafter FWD or FIAT Ducato. It is driven by the vehicle engine - this means that no harmful exhaust fumes are produced, which enables safe operation in the load compartment.
The hydraulics drive either the high-pressure cleaner or the vacuum cleaner. The integrated hot water flow heater makes cleaning faster and more efficient, even in cold temperatures. Liquids are reliably collected in a stainless steel tank. The system is also approved for use in ATEX-1 and ATEX-21 areas.
Technical details: Hydraulic requirement 15 l/min at 180 bar, high-performance cooling, 300-litre water tank, 10 m suction hose and 40-litre collection tank with automatic shut-off.
Find out more about the manufacturer here: FEP at KW Hydraulik.
You can find suitable applications here: Hydraulics for commercial vehicles & vans up to 7.5 tonnes.
This model can be installed in vans that do not have a transmission with power take-off (PTO).
- Hydraulics: 15 litres at 180 bar
- Hydraulic system with high-performance cooling.
- Thermal protection switch, oil level monitoring
- Pressure gauge and pressure relief valve
- Control unit with operating hours counter
- Emergency stop switch (disconnects the system from the drive)
- 12 volt on-board voltage for system control
- 300 litre stainless steel water tank with water separator
- Tank for cleaning additive 5 litres with proportion regulator
- Brush for vacuum cleaner
- Wash lance with high and low pressure nozzle
- Hydraulic vacuum cleaner
- Suction height 3 metres
- Hose reel with spring return for suction hose, 10 metres, hose diameter 38 mm
- 40 litre tank for holding the oil-water mixture, switch-off when tank is full
- Approval for ATEX-1 and ATEX-21 areas
- Dimensions: 1400x1100xH1250mm
Comparable tools
